My Indigo 2 Impact doesn’t work anymore. Thank you Elf for your information about the Indigo 2 power supply. I am measuring no voltage on pin 5 on the left hand connector (+5V standby) with the motherboard connected. When I disconnect the motherboard I measure 5V.
When I connect another 5V power supply to pin 1 and pin 5 of the motherboard I measure 5V. But the current is about 130 mA, it keeps changing between 120 and 135 mA. I think that’s too high.
Can anyone five me some advice?
When I connect another 5V power supply to pin 1 and pin 5 of the motherboard I measure 5V. But the current is about 130 mA, it keeps changing between 120 and 135 mA. I think that’s too high.
Can anyone five me some advice?