fuel

Hello everyone, I would like to sell my two machines, the Tezro and the Fuel. Perhaps some of you can give me a little hint about the price range we’re looking at. Both of them are running and in good condition, the Tezro has no OS. Greetings from Germany Basti

I got Fuel in a nonworking state and an additional CPU last year. I have been slowly trying to get it working. At first it didn't start up at all. I connected console to L1 port on the motherboard. First symptom was L1 not starting at all most of the time. Very rarely it would start. I removed...

Hi, some of the forum members suggested I should offer the DS1742W replacements also here at The Bazaar. Besides a local thread where I mentioned its development I mostly used an ebay listing. The fees there are terrible but I suppose they provide a maximum reach. I already made over a hundred...

Hi, I just got really confused by one of my Fuels that I believed was an 800 MHz machine. This was based on serial id's of its components, which are: 030-1932-001 PIMM 030-1707-003 Motherboard So far every Fuel I worked with and had a PIMM serial number starting with 030-19xx-xxx was an 800...

I'm selling my pristine Silicon Graphics Fuel 800Mhz R16K The machine is in an absolutely perfect state, with all working sensors/monitoring activated. The price I'm thinking to sell is around £1850. The config is: 800Mhz R12K V10 graphics Revolution Sound Board 1Gb Ram 36Gb Hard Disk CD-ROM...

Hi, I'm trying to fix my first Fuel and I'm having a problem of not getting an L1 prompt. The only thing I got after connecting the power is this: ALERT: Error initializing DS1780 1, no acknowledge ALERT: Error initializing DS1780 2, no acknowledge I'm sure a few weeks ago when I tried to...

I'm working on a much bigger project and realized this little piece could help some folks out when considering PCI cards. (References at the bottom) NOTE: Universal PCI Cards should fit in all systems that support PCI, these have 2 keys [gaps] in the card edge connector. PCI and it's...