Hey,
I have a Tezro that worked fine when I last used it. After a few years now, I experienced the following (one issue solved, one not):
1) L1 display was lit, but completely empty. I received advice to keep the machine plugged into mains for a while. I kept it powered for days, but nothing changed. Then when I tried a couple weeks later, just to confirm it's dead, it showed "001c01 L1 running", and the spinner icon is moving as expected.
So that's solved I hope.
2) But today I wanted to power it on. I pressed the power button but - absolutely nothing happens.
One reason could be that the power button may be broken. It was always kind-of suspicious (it seemed a bit pressed in, and didn't have the distinct "click" effect like the reset or nmi buttons).
But I don't know how to confirm if that button is the issue or not. I tried pressing it from different sides and with different levels of pressure - it didn't help.
On the right side of the machine, where the CPU module is, I see two orange LEDs lit up. I don't know if this is normal or an error condition.
Any advice? Thanks!
I have a Tezro that worked fine when I last used it. After a few years now, I experienced the following (one issue solved, one not):
1) L1 display was lit, but completely empty. I received advice to keep the machine plugged into mains for a while. I kept it powered for days, but nothing changed. Then when I tried a couple weeks later, just to confirm it's dead, it showed "001c01 L1 running", and the spinner icon is moving as expected.
So that's solved I hope.
2) But today I wanted to power it on. I pressed the power button but - absolutely nothing happens.
One reason could be that the power button may be broken. It was always kind-of suspicious (it seemed a bit pressed in, and didn't have the distinct "click" effect like the reset or nmi buttons).
But I don't know how to confirm if that button is the issue or not. I tried pressing it from different sides and with different levels of pressure - it didn't help.
On the right side of the machine, where the CPU module is, I see two orange LEDs lit up. I don't know if this is normal or an error condition.
Any advice? Thanks!