Need testers (for linux kernel)

Kaloz

New member
Dec 24, 2022
11
0
1
Might be better to post it here as well, not just on discord ;)

I've reached the point where I need some people who would boot(p) a linux kernel for me and send back the logs . I'm looking for people with either IP35 or IP27, the more exotic the better - looking at you Onyx4/3k people ;) - but in general any feedback is highly appreciated. It also has the preliminary vpro/odyssey console driver as well.

https://arrakis.dune.hu/vmlinux-test-ip27-ip35


Thanks!
 
I got this far on O300:

Checking hardware inventory ............... DONE

System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor. Type "exit" to return to the menu.
>> hinv
System SGI-IP35
4 600 MHz IP35 Processors
Main memory size: 2048 Mbytes
Integral Fast Ethernet
IOC3 serial port
USB (OHCI interface)
Integral SCSI controller 0: Version Qlogic 12160
Integral SCSI controller 1: Version Qlogic 12160
>> bootp()172.16.5.1:/IRIX/boot/vmlinux-test -x
Obtaining /IRIX/boot/vmlinux-test from server 172.16.5.1
14746800+272464 entry: 0xa800000000a2ff08

and then it stops.

Note: no GFX pipes in this server. Serial console via L2 controller only.
 
I got this far on O300:



and then it stops.

Note: no GFX pipes in this server. Serial console via L2 controller only.
Thanks, could you pass "console=ttyS0,9600" to it as well? it seems automatic detection doesn't work on all boxes
 
OK thanks! with console forced to 9600 and a second serial console attached to serial0, I get this output and then it stops:

XXX KALOZ: kl board errinfo 0 parent 0000000000000000 graph_link 19 confidence 0 owner 0
XXX KALOZ: kl board name IP35
XXX KALOZ: kl comp 0 9600000000032178 type 2 HUB version 2 flags 01 revision 2
XXX KALOZ: kl comp 0 diagval 0 diagparm 0 inventory 0 nic 000000005420d858 physid 0 virtid 0 widid 0 nasid 0 errinfo 232824 arcs 0000000000000000
XXX KALOZ: kl comp 1 9600000000032248 type 3 MEMBNK version 2 flags 01 revision 255
XXX KALOZ: kl comp 1 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 255 virtid 4294967295 widid 0 nasid 0 errinfo 234320 arcs 0000000000000000
XXX KALOZ: kl comp 2 9600000000032318 type 17 HUB_UART version 1 flags 31 revision 255
XXX KALOZ: kl comp 2 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 0 virtid 0 widid 0 nasid 0 errinfo 0 arcs c00000001318f780
XXX KALOZ: kl comp 3 9600000000032a68 type 1 CPU version 2 flags 01 revision 255
XXX KALOZ: kl comp 3 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 0 virtid 0 widid 0 nasid 0 errinfo 235384 arcs 0000000000000000
XXX KALOZ: kl comp 4 9600000000032b38 type 1 CPU version 2 flags 01 revision 255
XXX KALOZ: kl comp 4 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 1 virtid 1 widid 0 nasid 0 errinfo 235464 arcs 0000000000000000
XXX KALOZ: kl comp 5 9600000000032c08 type 1 CPU version 2 flags 01 revision 255
XXX KALOZ: kl comp 5 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 2 virtid 2 widid 0 nasid 0 errinfo 235544 arcs 0000000000000000
XXX KALOZ: kl comp 6 9600000000032cd8 type 1 CPU version 2 flags 01 revision 255
XXX KALOZ: kl comp 6 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 3 virtid 3 widid 0 nasid 0 errinfo 235624 arcs 0000000000000000
XXX KALOZ: kl board 9600000000030148 next 197144 struct_type 01 brd_type 42 class MIDPLANE type KLTYPE_PBRICK_XBOW
XXX KALOZ: kl board sversion 2 brevision 0 promver 1 flags 01 slot 0 debugsw 0000 module 1 partition 1
XXX KALOZ: kl board diagval 0 diagparm 0 inventory 0 numcompts 1 nic ffffffffffffffff nasid 0 nic_flags 00
XXX KALOZ: kl board errinfo 0 parent 9600000000030078 graph_link 22 confidence 0 owner 0
XXX KALOZ: kl board name IOBRICK
XXX KALOZ: kl comp 0 96000000000323e8 type 4 XBOW version 1 flags 01 revision 2
XXX KALOZ: kl comp 0 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 255 virtid 0 widid 0 nasid 0 errinfo 234368 arcs 0000000000000000
XXX KALOZ: kl board 9600000000030218 next 197352 struct_type 01 brd_type 71 class IOBRICK type KLTYPE_IBRICK
XXX KALOZ: kl board sversion 2 brevision 0 promver 1 flags 41 slot 14 debugsw 0000 module 1 partition 1
XXX KALOZ: kl board diagval 0 diagparm 0 inventory 0 numcompts 2 nic 00000000523ce794 nasid 0 nic_flags 00
XXX KALOZ: kl board errinfo 0 parent 9600000000030148 graph_link 23 confidence 0 owner 0
XXX KALOZ: kl board name Ibrick
XXX KALOZ: kl comp 0 9600000000032588 type 5 BRI version 2 flags 01 revision 2
XXX KALOZ: kl comp 0 diagval 0 diagparm 0 inventory 0 nic 00000000523ce794 physid 14 virtid 14 widid 14 nasid 0 errinfo 234616 arcs 0000000000000000
XXX KALOZ: kl comp 1 9600000000032658 type 0 UNKNOWN version 1 flags 31 revision 255
XXX KALOZ: kl comp 1 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 2 virtid 0 widid 14 nasid 0 errinfo 234928 arcs 0000000000000000
XXX KALOZ: kl board 96000000000302e8 next 197560 struct_type 01 brd_type 71 class IOBRICK type KLTYPE_IBRICK
XXX KALOZ: kl board sversion 2 brevision 0 promver 1 flags 31 slot 15 debugsw 0000 module 1 partition 1
XXX KALOZ: kl board diagval 0 diagparm 0 inventory 0 numcompts 4 nic 00000000523ce794 nasid 0 nic_flags 00
XXX KALOZ: kl board errinfo 0 parent 9600000000030148 graph_link 26 confidence 0 owner 0
XXX KALOZ: kl board name Ibrick
XXX KALOZ: kl comp 0 9600000000032728 type 5 BRI version 2 flags 01 revision 2
XXX KALOZ: kl comp 0 diagval 0 diagparm 0 inventory 0 nic 00000000523ce794 physid 15 virtid 15 widid 15 nasid 0 errinfo 234976 arcs 0000000000000000
XXX KALOZ: kl comp 1 96000000000327f8 type 37 ? version 1 flags 31 revision 6
XXX KALOZ: kl comp 1 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 1 virtid 4294967295 widid 15 nasid 0 errinfo 0 arcs c00000001318f2c0
XXX KALOZ: kl comp 2 96000000000328c8 type 6 IOC3 version 1 flags 31 revision 1
XXX KALOZ: kl comp 2 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 4 virtid 0 widid 15 nasid 0 errinfo 0 arcs c00000001318f380
XXX KALOZ: kl comp 3 9600000000032998 type 34 ? version 1 flags 31 revision 255
XXX KALOZ: kl comp 3 diagval 0 diagparm 0 inventory 0 nic ffffffffffffffff physid 5 virtid 4294967295 widid 15 nasid 0 errinfo 235336 arcs c000000013190280
XXX KALOZ: kl board 96000000000303b8 next 0 struct_type 01 brd_type 31 class ROUTER type KLTYPE_ROUTER
XXX KALOZ: kl board sversion 2 brevision 0 promver 1 flags 01 slot 0 debugsw 0000 module 4116 partition 0
XXX KALOZ: kl board diagval 0 diagparm 0 inventory 0 numcompts 1 nic 000000005452cd3d nasid 0 nic_flags 00
XXX KALOZ: kl board errinfo 0 parent 0000000000000000 graph_link ffffffff confidence 0 owner 0
XXX KALOZ: kl board name not text, first byte 00
XXX KALOZ: kl comp 0 9600000000032da8 type 9 ROU version 2 flags 01 revision 255
XXX KALOZ: kl comp 0 diagval 0 diagparm 0 inventory 0 nic 000000005452cd3d physid 0 virtid 0 widid 0 nasid 0 errinfo 235704 arcs 0000000000000000
XXX KALOZ: kl nasid 0, 5 boards
XXX KALOZ: gda a80000000000b000 magic 58464552 version 2 masterid 0 promop 0ead0000 vds 00000000 partid 0 symmax 0
XXX KALOZ: gda nasidtable[0] 0
IP35: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has a secondary CPU, CPU is running.
Machine is in M mode.
MIPS: machine is SGI Origin 300
XXX KALOZ: l1 nasid 0 address 0ffff006 request 0003 sending 10 0f ff f0 06 00 03 00
XXX KALOZ: l1 response 16 bytes 30 00 00 00 00 02 00 00 00 00 41 00 00 00 00 34
XXX KALOZ: l1 response code 00000000 nargs 2
XXX KALOZ: l1 arg 0 type 00 value 00000041 low byte 41 char A
XXX KALOZ: l1 arg 1 type 00 value 00000034 low byte 34 char 4
XXX KALOZ: l1 brick type 0x34 '4' without graphics board matched row 0 -> SGI Origin 300
XXX KALOZ: l1 component 0 part number 030-1797-001
XXX KALOZ: l1 component 1 part number 030-1673-004
XXX KALOZ: l1 component 2 no part number (-6)
XXX KALOZ: l1 component 3 no part number (-6)
XXX KALOZ: l1 component 4 no part number (-6)
XXX KALOZ: l1 component 5 no part number (-6)
XXX KALOZ: l1 component 6 no part number (-6)
XXX KALOZ: l1 component 7 no part number (-6)
Initrd not found or empty - disabling initrd
software IO TLB: area num 4.
software IO TLB: mapped [mem 0x0000000004000000-0x0000000008000000] (64MB)
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 4096kB 2-way, linesize 128 bytes.
Zone ranges:
Normal [mem 0x0000000000000000-0x00000000dfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000001fffffff]
node 0: [mem 0x0000000040000000-0x000000005fffffff]
node 0: [mem 0x0000000080000000-0x000000009fffffff]
node 0: [mem 0x00000000c0000000-0x00000000dfffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000000dfffffff]
percpu: Embedded 19 pages/cpu s37920 r8192 d31712 u77824
XXX KALOZ: cpu 0 nasid 0 slice 0 pi 0 speed 600MHz
CPU 0 clock is 600MHz.
Kernel command line: root=bootp() showconfig=1 console=ttyS0,9600 console=tty0
Unknown kernel command line parameters "showconfig=1", will be passed to user space.
printk: log buffer data + meta data: 32768 + 114688 = 147456 bytes
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 524288
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:eek:ff, heap free:eek:ff
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 256
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
clocksource: HUB-RT: mask: 0xfffffffffffff max_cycles: 0x127350b88, max_idle_ns: 1763180808480 ns
sched_clock: 52 bits at 1250kHz, resolution 800ns, wraps every 4398046510800ns
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
printk: legacy bootconsole [early0] disabled
 
OK thanks! with console forced to 9600 and a second serial console attached to serial0, I get this output and then it stops:
yay :) could you please also add "keep_bootcon" to the command line?
 
okay, now we get this far:

Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
Calibrating delay loop... 894.97 BogoMIPS (lpj=447488)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
VFS: Finished mounting rootfs on nullfs
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
smp: Bringing up secondary CPUs ...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 4096kB 2-way, linesize 128 bytes.
XXX KALOZ: cpu 1 nasid 0 slice 1 pi 0 speed 600MHz
CPU 1 clock is 600MHz.
CPU1 revision is: 00000f24 (R14000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 4096kB 2-way, linesize 128 bytes.
XXX KALOZ: cpu 2 nasid 0 slice 2 pi 1 speed 600MHz
CPU 2 clock is 600MHz.
CPU2 revision is: 00000f24 (R14000)
FPU revision is: 00000900
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 4096kB 2-way, linesize 128 bytes.
XXX KALOZ: cpu 3 nasid 0 slice 3 pi 1 speed 600MHz
CPU 3 clock is 600MHz.
CPU3 revision is: 00000f24 (R14000)
FPU revision is: 00000900
smp: Brought up 1 node, 4 CPUs
Memory: 1929424K/2097152K available (10232K kernel code, 498K rwdata, 2368K rodata, 1348K init, 203K bss, 163936K reserved, 0K cma-reserved)
devtmpfs: initialized
posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
futex hash table entries: 1024 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
XXX KALOZ: xtalk n0/0 widget_id 2d000001 part 0xd000 rev 0x2 setup xbow_probe
xtalk:n0/0 xbow widget
XXX KALOZ: xtalk n0/e widget_id 2d002049 part 0xd002 rev 0x2 setup bridge_platform_create
xtalk:n0/e bridge widget
XXX KALOZ: xtalk n0/f widget_id 2d002049 part 0xd002 rev 0x2 setup bridge_platform_create
xtalk:n0/f bridge widget
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
clocksource: Switched to clocksource HUB-RT
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 128
Initialise system trusted keyrings
workingset: timestamp_bits=56 (anon: 51) max_order=19 bucket_order=0 (anon: 0)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
xor: measuring software checksum speed
32regs_prefetch : 2605 MB/sec
32regs : 2905 MB/sec
8regs_prefetch : 2608 MB/sec
8regs : 2901 MB/sec
xor: using function: 32regs (2905 MB/sec)
raid6: int64x1 gen() 480 MB/s
raid6: int64x2 gen() 651 MB/s
raid6: int64x4 gen() 701 MB/s
raid6: int64x8 gen() 514 MB/s
raid6: using algorithm int64x4 gen() 701 MB/s
raid6: .... xor() 406 MB/s, rmw enabled
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
loop: module loaded
st: Version 20160209, fixed bufsize 32768, s/g segs 256
rtc-sgi-l1 rtc-sgi-l1: registered as rtc0
rtc-sgi-l1 rtc-sgi-l1: setting system clock to 2026-09-27T06:35:43 UTC (1790490943)
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
NET: Registered PF_KEY protocol family
XXX KALOZ: bridge n0/e bus0 XBridge 1-wire=err -517 l1=030-1673-004 match=030-1673- setup bridge_setup_io8
xtalk-bridge xtalk-bridge.0.auto: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x0e200000-0x0effffff]
pci_bus 0000:00: root bus resource [io 0xe200000-0xeffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:02.0: [1000:0050] type 00 class 0x010000 conventional PCI endpoint
pci 0000:00:02.0: BAR 0 [io 0x0000-0x00ff]
pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00003fff 64bit]
pci 0000:00:02.0: BAR 3 [mem 0x00000000-0x0000ffff 64bit]
pci 0000:00:02.0: ROM [mem 0x00000000-0x001fffff pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: BAR 0 [io 0x0000-0x00ff]: can't claim; no compatible bridge window
pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00003fff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.0: BAR 3 [mem 0x00000000-0x0000ffff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.0: ROM [mem 0x00000000-0x001fffff pref]: can't claim; no compatible bridge window
XXX KALOZ: bridge n0/f bus1 XBridge 1-wire=err -517 l1=030-1673-004 match=030-1673- setup bridge_setup_io8
xtalk-bridge xtalk-bridge.1.auto: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x0f200000-0x0fffffff]
pci_bus 0001:00: root bus resource [io 0xf200000-0xfffffff]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci 0001:00:01.0: [1077:1216] type 00 class 0x010000 conventional PCI endpoint
pci 0001:00:01.0: BAR 0 [io 0xf400000-0xf4000ff]
pci 0001:00:01.0: BAR 1 [mem 0x0f400000-0x0f400fff]
pci 0001:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]
pci 0001:00:04.0: [10a9:0003] type 00 class 0xff0000 conventional PCI endpoint
pci 0001:00:04.0: BAR 0 [mem 0x0f800000-0x0f8fffff]
pci 0001:00:05.0: [11c1:5802] type 00 class 0x0c0310 conventional PCI endpoint
pci 0001:00:05.0: BAR 0 [mem 0x0f900000-0x0f900fff]
pci 0001:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]: can't claim; no compatible bridge window
qla1280: QLA12160 found on PCI bus 0, dev 1
qla1280 0001:00:01.0: enabling device (0006 -> 0007)
scsi(0): Reading NVRAM
scsi(0): Unable to identify or validate NVRAM checksum, using default settings
scsi(0:0): Resetting SCSI BUS
scsi(0:1): Resetting SCSI BUS
scsi host0: QLogic QLA12160 PCI to SCSI Host Adapter
Firmware version: 10.04.42, Driver version 3.27.1
ioc3: CAD DUO
l1: EEPROM Ethernet address 08:00:69:11:d8:b6
ioc3-eth ioc3-eth.2.auto eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
ioc3-eth ioc3-eth.2.auto eth0: Using PHY 1, vendor 0x20005c1, model 1, rev 0.
ioc3-eth ioc3-eth.2.auto eth0: IOC3 SSRAM has 128 kbyte.
Loading compiled-in X.509 certificates
atkbd serio0: keyboard reset failed on ioc3/serio4kbd
Demotion targets for Node 0: null
atkbd serio1: keyboard reset failed on ioc3/serio4aux
Freeing unused kernel image (initmem) memory: 1348K
This architecture does not have kernel memory protection.
Run /init as init process
process '/bin/busybox' started with executable stack
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 ]---
 
thanks! no more kernel panique. stops at "random: crng init done"

ioc3-eth ioc3-eth.2.auto eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
ioc3-eth ioc3-eth.2.auto eth0: Using PHY 1, vendor 0x20005c1, model 1, rev 0.
ioc3-eth ioc3-eth.2.auto eth0: IOC3 SSRAM has 128 kbyte.
printk: console [ttyS0] disabled�cu: Got hangup signal

Disconnected.
flexion@phy-01:~$ cu -l ttyUSB0 -s 9600
Connected.
Freeing unused kernel image (initmem) memory: 1348K
Freeing unused kernel image (initmem) memory: 1348K
This architecture does not have kernel memory protection.
This architecture does not have kernel memory protection.
Run /init as init process
Run /init as init process
process '/bin/busybox' started with executable stack
process '/bin/busybox' started with executable stack
tester-6 init alive
tester-6 init alive
--- /proc/bus/pci/devices ---
--- /proc/bus/pci/devices ---
cat: write error: Invalid argument
cat: write error: Invalid argument
--- /proc/cmdline ---
--- /proc/cmdline ---
console=tty0 root=bootp() showconfig=1 console=ttyS0,9600 keep_bootcon -x
console=tty0 root=bootp() showconfig=1 console=ttyS0,9600 keep_bootcon -x
--- /proc/consoles ---
--- /proc/consoles ---
ttyS0 -W- (EC N a) 4:64
early0 -W- (E B p )
tty0 -WU (E p ) 4:1
ttyS0 -W- (EC N a) 4:64
early0 -W- (E B p )
tty0 -WU (E p ) 4:1
--- /proc/tty/drivers ---
--- /proc/tty/drivers ---
/dev/tty /dev/tty 5 0 system:/dev/tty
/dev/console /dev/console 5 1 system:console
/dev/ptmx /dev/ptmx 5 2 system
/dev/vc/0 /dev/vc/0 4 0 system:vtmaster
serial_8250 /dev/ttyS 4 64-67 serial
pty_slave /dev/pts 136 0-1048575 pty:slave
pty_master /dev/ptm 128 0-1048575 pty:master
pty_slave /dev/ttyp 3 0-255 pty:slave
pty_master /dev/pty 2 0-255 pty:master
unknown /dev/tty 4 1-63 console
/dev/tty /dev/tty 5 0 system:/dev/tty
/dev/console /dev/console 5 1 system:console
/dev/ptmx /dev/ptmx 5 2 system
/dev/vc/0 /dev/vc/0 4 0 system:vtmaster
serial_8250 /dev/ttyS 4 64-67 serial
pty_slave /dev/pts 136 0-1048575 pty:slave
pty_master /dev/ptm 128 0-1048575 pty:master
pty_slave /dev/ttyp 3 0-255 pty:slave
pty_master /dev/pty 2 0-255 pty:master
unknown /dev/tty 4 1-63 console
--- /dev/ttyS* ---
--- /dev/ttyS* ---
random: crng init done
random: crng init done
 
just for the records.. successfully boots on Origin300 now (y) thanks!

~ # uname -a
Linux (none) 7.3.0-rc3-00352-g3d56dd79da18 #1 SMP Fri Oct 2 11:29:41 CEST 2026 mips64 GNU/Linux
~ # cat /proc/cpuinfo
system type : SGI IP35
machine : SGI Origin 300
processor : 0
cpu model : R14000 V2.4 FPU V0.0
BogoMIPS : 894.97
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
isa : mips1 mips2 mips3 mips4
ASEs implemented :
Options implemented : tlb 4kex 4k_cache fpu 32fpr prefetch llsc inclusive_pcaches nan_legacy
shadow register sets : 1
kscratch registers : 0
package : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 1
cpu model : R14000 V2.4 FPU V0.0
BogoMIPS : 900.09
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
isa : mips1 mips2 mips3 mips4
ASEs implemented :
Options implemented : tlb 4kex 4k_cache fpu 32fpr prefetch llsc inclusive_pcaches nan_legacy
shadow register sets : 1
kscratch registers : 0
package : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 2
cpu model : R14000 V2.4 FPU V0.0
BogoMIPS : 905.21
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
isa : mips1 mips2 mips3 mips4
ASEs implemented :
Options implemented : tlb 4kex 4k_cache fpu 32fpr prefetch llsc inclusive_pcaches nan_legacy
shadow register sets : 1
kscratch registers : 0
package : 2
core : 0
VCED exceptions : not available
VCEI exceptions : not available

processor : 3
cpu model : R14000 V2.4 FPU V0.0
BogoMIPS : 905.21
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes, count: 0, address/irw mask: []
isa : mips1 mips2 mips3 mips4
ASEs implemented :
Options implemented : tlb 4kex 4k_cache fpu 32fpr prefetch llsc inclusive_pcaches nan_legacy
shadow register sets : 1
kscratch registers : 0
package : 3
core : 0
VCED exceptions : not available
VCEI exceptions : not available

~ #
 
  • Love
Reactions: rams
Oh, nice – I'd not seen this (on Discord… I need to catch-up!)… what's the IP30/IP32/IP35 hardware support like?

I recall that historical VPro graphics were basically undocumented, but I guess that these days and with enough tokens the IRIX drivers could be reverse-engineered?
 
Oh, nice – I'd not seen this (on Discord… I need to catch-up!)… what's the IP30/IP32/IP35 hardware support like?

I recall that historical VPro graphics were basically undocumented, but I guess that these days and with enough tokens the IRIX drivers could be reverse-engineered?
turns out SGI shipped the driver and the kernel unstripped.. ;)
 
turns out SGI shipped the driver and the kernel unstripped.. ;)

… and the full 6.5.5f and 6.5.7m sources are available, so it _should_ be possible to work forwards from there to end up with source-code which is at least functionally equivalent to what ended up in IRIX 6.5.30f… eventually 😯
 
… and the full 6.5.5f and 6.5.7m sources are available, so it _should_ be possible to work forwards from there to end up with source-code which is at least functionally equivalent to what ended up in IRIX 6.5.30f… eventually 😯
looking at that would taint the work. RE for compatibility does not - but to each to his own :)
 
To answer my own question, Bedrock-based systems only, so IP35/IP53 – but this is being added to the existing IP27 code, so that might already cover IP30?
IP30 is supported for a long time now, even IP32 with !r10k
 
I like to report that I had success on an SGI fuel. Here's some notes while playing around.

- It detected my crucial ssd and the partitions, fdisk doesn't see the layout (busybox bug?)
- tg3 is a Tigon3 1Gbps card and worked and I was able to ping another machine on the network
- the builtin network interface worked as expected. ipv6 also worked with both interface. note both cards got assigned the same MAC (SGI feature?).
- m-audio card wasn't detected
- adaptec card wasn't detected
- reboot -f command worked

Code:
Linux version 7.3.0-rc3-00352-g3d56dd79da18 (kaloz@playground) (mips64-linux-gnuabi64-gcc (Debian 14.2.0-13) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP Fri Oct  2 11:29:41 CEST 2026
Discovered 1 cpus on 1 nodes
************** Topology ********************
    00
00  10
printk: legacy bootconsole [early0] enabled
CPU0 revision is: 00000f41 (R16000)
FPU revision is: 00000900
IP35: Running on node 0.
Node 0 has a primary CPU, CPU is running.
Node 0 has no secondary CPU.
Machine is in M mode.
MIPS: machine is SGI Fuel
printk: debug: skip boot console de-registration.
Initrd not found or empty - disabling initrd
software IO TLB: area num 1.
software IO TLB: mapped [mem 0x0000000004003000-0x0000000008003000] (64MB)
REPLICATION: ON nasid 0, ktext from nasid 0, kdata from nasid 0
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes
Unified secondary cache 4096kB 2-way, linesize 128 bytes.
Zone ranges:
  Normal   [mem 0x0000000000000000-0x00000000dfffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000001fffffff]
  node   0: [mem 0x0000000040000000-0x000000005fffffff]
  node   0: [mem 0x0000000080000000-0x000000009fffffff]
  node   0: [mem 0x00000000c0000000-0x00000000dfffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000000dfffffff]
percpu: Embedded 19 pages/cpu s37920 r8192 d31712 u77824
CPU 0 clock is 700MHz.
Kernel command line: console=tty0 root=dksc(0,1,0) console=ttyS0,9600 keep_bootcon
printk: log buffer data + meta data: 32768 + 114688 = 147456 bytes
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on.  Total pages: 524288
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
NR_IRQS: 256
rcu: srcu_init: Setting srcu_struct sizes based on contention.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
clocksource: HUB-RT: mask: 0xfffffffffffff max_cycles: 0x127350b88, max_idle_ns: 1763180808480 ns
sched_clock: 52 bits at 1250kHz, resolution 800ns, wraps every 4398046510800ns
Console: colour dummy device 80x25
printk: legacy console [tty0] enabled
Calibrating delay loop... 1048.57 BogoMIPS (lpj=524288)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
VFS: Finished mounting rootfs on nullfs
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 400.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
Memory: 1930936K/2097152K available (10077K kernel code, 500K rwdata, 2312K rodata, 1300K init, 203K bss, 163720K reserved, 0K cma-reserved)
devtmpfs: initialized
posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)
futex hash table entries: 256 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear).
NET: Registered PF_NETLINK/PF_ROUTE protocol family
thermal_sys: Registered thermal governor 'step_wise'
xtalk:n0/0 xbow widget
xtalk:n0/d odyssey widget: reg=[0x000000000d000000-0x000000000d40ffff]
xtalk:n0/e bridge widget
xtalk:n0/f bridge widget
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
clocksource: Switched to clocksource HUB-RT
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 128
Initialise system trusted keyrings
workingset: timestamp_bits=56 (anon: 51) max_order=19 bucket_order=0 (anon: 0)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
io scheduler kyber registered
xor: measuring software checksum speed
   32regs_prefetch :  3073 MB/sec
   32regs          :  3412 MB/sec
   8regs_prefetch  :  3068 MB/sec
   8regs           :  3419 MB/sec
xor: using function: 8regs (3419 MB/sec)
raid6: int64x1  gen()   586 MB/s
raid6: int64x2  gen()   761 MB/s
raid6: int64x4  gen()   818 MB/s
raid6: int64x8  gen()   605 MB/s
raid6: using algorithm int64x4 gen() 818 MB/s
raid6: .... xor() 479 MB/s, rmw enabled
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
loop: module loaded
st: Version 20160209, fixed bufsize 32768, s/g segs 256
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
NET: Registered PF_KEY protocol family
xtalk-bridge xtalk-bridge.1.auto: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x0e200000-0x0effffff]
pci_bus 0000:00: root bus resource [io  0xe200000-0xeffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:01.0: [14e4:1645] type 00 class 0x020000 conventional PCI endpoint
pci 0000:00:01.0: BAR 0 [mem 0x0e400000-0x0e40ffff 64bit]
pci 0000:00:01.0: PME# supported from D3hot
pci 0000:00:02.0: [1000:0030] type 00 class 0x010000 conventional PCI endpoint
pci 0000:00:02.0: BAR 0 [io  0x0000-0x00ff]
pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x0001ffff 64bit]
pci 0000:00:02.0: BAR 3 [mem 0x00000000-0x0001ffff 64bit]
pci 0000:00:02.0: ROM [mem 0x00000000-0x000fffff pref]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.1: [1000:0030] type 00 class 0x010000 conventional PCI endpoint
pci 0000:00:02.1: BAR 0 [io  0x0000-0x00ff]
pci 0000:00:02.1: BAR 1 [mem 0x00000000-0x0001ffff 64bit]
pci 0000:00:02.1: BAR 3 [mem 0x00000000-0x0001ffff 64bit]
pci 0000:00:02.1: ROM [mem 0x00000000-0x000fffff pref]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.0: BAR 0 [io  0x0000-0x00ff]: can't claim; no compatible bridge window
pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x0001ffff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.0: BAR 3 [mem 0x00000000-0x0001ffff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.0: ROM [mem 0x00000000-0x000fffff pref]: can't claim; no compatible bridge window
pci 0000:00:02.1: BAR 0 [io  0x0000-0x00ff]: can't claim; no compatible bridge window
pci 0000:00:02.1: BAR 1 [mem 0x00000000-0x0001ffff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.1: BAR 3 [mem 0x00000000-0x0001ffff 64bit]: can't claim; no compatible bridge window
pci 0000:00:02.1: ROM [mem 0x00000000-0x000fffff pref]: can't claim; no compatible bridge window
l1: EEPROM Ethernet address 08:00:69:10:85:e9
tg3 0000:00:01.0 eth0: Tigon3 [partno(9210289) rev 0105] (PCI:66MHz:64-bit) MAC address 08:00:69:10:85:e9
tg3 0000:00:01.0 eth0: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:00:01.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
tg3 0000:00:01.0 eth0: dma_rwctrl[76ff000f] dma_mask[64-bit]
xtalk-bridge xtalk-bridge.2.auto: PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x0f200000-0x0fffffff]
pci_bus 0001:00: root bus resource [io  0xf200000-0xfffffff]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci 0001:00:01.0: [1077:1216] type 00 class 0x010000 conventional PCI endpoint
pci 0001:00:01.0: BAR 0 [io  0xf400000-0xf4000ff]
pci 0001:00:01.0: BAR 1 [mem 0x0f400000-0x0f400fff]
pci 0001:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]
pci 0001:00:02.0: [1412:1724] type 00 class 0x040100 conventional PCI endpoint
pci 0001:00:02.0: BAR 0 [io  0x0000-0x001f]
pci 0001:00:02.0: BAR 1 [io  0x0000-0x007f]
pci 0001:00:02.0: supports D2
pci 0001:00:04.0: [10a9:0003] type 00 class 0xff0000 conventional PCI endpoint
pci 0001:00:04.0: BAR 0 [mem 0x0f800000-0x0f8fffff]
pci 0001:00:05.0: [1045:c861] type 00 class 0x0c0310 conventional PCI endpoint
pci 0001:00:05.0: BAR 0 [mem 0x0f900000-0x0f900fff]
pci 0001:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]: can't claim; no compatible bridge window
pci 0001:00:02.0: BAR 0 [io  0x0000-0x001f]: can't claim; no compatible bridge window
pci 0001:00:02.0: BAR 1 [io  0x0000-0x007f]: can't claim; no compatible bridge window
qla1280: QLA12160 found on PCI bus 0, dev 1
qla1280 0001:00:01.0: enabling device (0006 -> 0007)
scsi(0): Reading NVRAM
scsi(0): Unable to identify or validate NVRAM checksum, using default settings
scsi(0:0): Resetting SCSI BUS
scsi(0:1): Resetting SCSI BUS
scsi host0: QLogic QLA12160 PCI to SCSI Host Adapter
       Firmware version: 10.04.42, Driver version 3.27.1
ioc3: IP34 System Board
ioc3-eth ioc3-eth.3.auto eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
ioc3-eth ioc3-eth.3.auto eth1: Using PHY 1, vendor 0x20005c1, model 1, rev 0.
ioc3-eth ioc3-eth.3.auto eth1: IOC3 SSRAM has 128 kbyte.
printk: console [ttyS0] disabled
ioc3-serial8250.5.auto: ttyS0 MMIO:0x000000000f820178 (irq = 12, base_baud = 458333) is a 16550A
printk: console [ttyS0] enabled
printk: console [ttyS0] enabled
scsi 0:0:1:0: Direct-Access     CT240BX3 00SSD1           M2CR PQ: 0 ANSI: 3
scsi 0:0:1:0: Direct-Access     CT240BX3 00SSD1           M2CR PQ: 0 ANSI: 3
ioc3-serial8250.6.auto: ttyS1 MMIO:0x000000000f820170 (irq = 15, base_baud = 458333) is a 16550A
ioc3-serial8250.6.auto: ttyS1 MMIO:0x000000000f820170 (irq = 15, base_baud = 458333) is a 16550A
scsi(0:0:1:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 31
scsi(0:0:1:0): Sync: period 9, offset 14, Wide, DT, Tagged queuing: depth 31
rtc-m48t35 rtc-m48t35-ip35.7.auto: registered as rtc0
rtc-m48t35 rtc-m48t35-ip35.7.auto: registered as rtc0
rtc-m48t35 rtc-m48t35-ip35.7.auto: setting system clock to 2026-10-07T08:49:23 UTC (1791362963)
rtc-m48t35 rtc-m48t35-ip35.7.auto: setting system clock to 2026-10-07T08:49:23 UTC (1791362963)
scsi 0:0:1:0: Power-on or device reset occurred
scsi 0:0:1:0: Power-on or device reset occurred
Loading compiled-in X.509 certificates
Loading compiled-in X.509 certificates
Demotion targets for Node 0: null
Demotion targets for Node 0: null
Warning: unable to open an initial console.
Warning: unable to open an initial console.
scsi 0:0:4:0: Sequential-Access SONY     SDT-10000        0200 PQ: 0 ANSI: 2
scsi 0:0:4:0: Sequential-Access SONY     SDT-10000        0200 PQ: 0 ANSI: 2
scsi(0:0:4:0): Sync: period 9, offset 14, Wide
scsi(0:0:4:0): Sync: period 9, offset 14, Wide
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio0/input/input1
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio0/input/input1
input: AT Raw Set 2 keyboard as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio1/input/input2
input: AT Raw Set 2 keyboard as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio1/input/input2
scsi 0:1:6:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1711 1005 PQ: 0 ANSI: 2
scsi 0:1:6:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1711 1005 PQ: 0 ANSI: 2
scsi(0:1:6:0): Sync: period 9, offset 14
scsi(0:1:6:0): Sync: period 9, offset 14
sd 0:0:1:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:1:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
st 0:0:4:0: Attached scsi tape st0
st 0:0:4:0: Attached scsi tape st0
st 0:0:4:0: st0: try direct i/o: yes (alignment 4 B)
st 0:0:4:0: st0: try direct i/o: yes (alignment 4 B)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda9 sda11
 sda: sda1 sda2 sda9 sda11
sd 0:0:1:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel image (initmem) memory: 1300K
Freeing unused kernel image (initmem) memory: 1300K
This architecture does not have kernel memory protection.
This architecture does not have kernel memory protection.
Run /init as init process
Run /init as init process
process '/bin/busybox' started with executable stack
process '/bin/busybox' started with executable stack
T8: init alive
T8: init alive
T8: --- /proc/cmdline ---
T8: --- /proc/cmdline ---
T8: console=tty0 root=dksc(0,1,0) console=ttyS0,9600 keep_bootcon
T8: console=tty0 root=dksc(0,1,0) console=ttyS0,9600 keep_bootcon
T8: --- /proc/consoles ---
T8: --- /proc/consoles ---
T8: ttyS0                -W- (EC N  a)    4:64
T8: ttyS0                -W- (EC N  a)    4:64
T8: early0               -W- (E B p  )
T8: early0               -W- (E B p  )
T8: tty0                 -WU (E   p  )    4:1
T8: tty0                 -WU (E   p  )    4:1
T8: --- /proc/bus/pci/devices ---
T8: --- /proc/bus/pci/devices ---
T8: 000814e416458         e400004               0               0               0               0               0               0           10000               0               0               0               0               0               0tg3
T8: 000814e416458         e400004               0               0               0               0               0               0           10000               0               0               0               0               0               0tg3
T8: 0010100000300               1               4               0               4               0               0               0             100           20000               0           20000               0               0          100000
T8: 0010100000300               1               4               0               4               0               0               0             100           20000               0           20000               0               0          100000
T8: 0011100000300               1               4               0               4               0               0               0             100           20000               0           20000               0               0          100000
T8: 0011100000300               1               4               0               4               0               0               0             100           20000               0           20000               0               0          100000
T8: 0008107712169         f400001         f400000               0               0               0               0               0             100            1000               0               0               0               0           20000qla1280
T8: 0008107712169         f400001         f400000               0               0               0               0               0             100            1000               0               0               0               0           20000qla1280
T8: 001014121724ff               1               1               0               0               0               0               0              20              80               0               0               0               0               0
T8: 001014121724ff               1               1               0               0               0               0               0              20              80               0               0               0               0               0
T8: 002010a90003a         f800000               0               0               0               0               0               0          100000               0               0               0               0               0               0IOC3
T8: 002010a90003a         f800000               0               0               0               0               0               0          100000               0               0               0               0               0               0IOC3
T8: 00281045c8610         f900000               0               0               0               0               0               0            1000               0               0               0               0               0               0
T8: 00281045c8610         f900000               0               0               0               0               0               0            1000               0               0               0               0               0               0
T8: --- /proc/interrupts ---
T8: --- /proc/interrupts ---
T8:             CPU0  
T8:             CPU0  
T8:    4:       2219  MIPS        4  hub-rt
T8:    4:       2219  MIPS        4  hub-rt
T8:    9:        403  BRIDGE      1  qla1280
T8:    9:        403  BRIDGE      1  qla1280
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   22:        286  IOC3       22  ioc3-kbd
T8:   22:        286  IOC3       22  ioc3-kbd
T8:  ERR:          0
T8:  ERR:          0
T8: --- /proc/tty/driver/serial ---
T8: --- /proc/tty/driver/serial ---
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: --- ls -l /dev/ttyS* ---
T8: --- ls -l /dev/ttyS* ---
T8: crw-------    1 0        0           4,  64 Jan  1  1970 /dev/ttyS0
T8: crw-------    1 0        0           4,  64 Jan  1  1970 /dev/ttyS0
T8: crw-------    1 0        0           4,  65 Jan  1  1970 /dev/ttyS1
T8: crw-------    1 0        0           4,  65 Jan  1  1970 /dev/ttyS1
T8: crw-------    1 0        0           4,  66 Jan  1  1970 /dev/ttyS2
T8: crw-------    1 0        0           4,  66 Jan  1  1970 /dev/ttyS2
T8: crw-------    1 0        0           4,  67 Jan  1  1970 /dev/ttyS3
T8: crw-------    1 0        0           4,  67 Jan  1  1970 /dev/ttyS3
T8: --- dmesg | grep ioc3/serial/ttyS/8250/subsys ---
T8: --- dmesg | grep ioc3/serial/ttyS/8250/subsys ---
T8: Kernel command line: console=tty0 root=dksc(0,1,0) console=ttyS0,9600 keep_bootcon
T8: Kernel command line: console=tty0 root=dksc(0,1,0) console=ttyS0,9600 keep_bootcon
T8: SCSI subsystem initialized
T8: SCSI subsystem initialized
T8: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
T8: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
T8: ioc3: IP34 System Board
T8: ioc3: IP34 System Board
T8: ioc3-eth ioc3-eth.3.auto eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
T8: ioc3-eth ioc3-eth.3.auto eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
T8: ioc3-eth ioc3-eth.3.auto eth1: Using PHY 1, vendor 0x20005c1, model 1, rev 0.
T8: ioc3-eth ioc3-eth.3.auto eth1: Using PHY 1, vendor 0x20005c1, model 1, rev 0.
T8: ioc3-eth ioc3-eth.3.auto eth1: IOC3 SSRAM has 128 kbyte.
T8: ioc3-eth ioc3-eth.3.auto eth1: IOC3 SSRAM has 128 kbyte.
T8: printk: console [ttyS0] disabled
T8: printk: console [ttyS0] disabled
T8: ioc3-serial8250.5.auto: ttyS0 MMIO:0x000000000f820178 (irq = 12, base_baud = 458333) is a 16550A
T8: ioc3-serial8250.5.auto: ttyS0 MMIO:0x000000000f820178 (irq = 12, base_baud = 458333) is a 16550A
T8: printk: console [ttyS0] enabled
T8: printk: console [ttyS0] enabled
T8: ioc3-serial8250.6.auto: ttyS1 MMIO:0x000000000f820170 (irq = 15, base_baud = 458333) is a 16550A
T8: ioc3-serial8250.6.auto: ttyS1 MMIO:0x000000000f820170 (irq = 15, base_baud = 458333) is a 16550A
T8: input: ImPS/2 Logitech Wheel Mouse as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio0/input/input1
T8: input: ImPS/2 Logitech Wheel Mouse as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio0/input/input1
T8: input: AT Raw Set 2 keyboard as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio1/input/input2
T8: input: AT Raw Set 2 keyboard as /devices/platform/xtalk-bridge.2.auto/pci0001:00/0001:00:04.0/ioc3-kbd.8.auto/serio1/input/input2
T8: TX test: writing marker to /dev/ttyS0
T8: TX test: writing marker to /dev/ttyS0
T8-TX-MARKER-1234
T8: TX write exit status 0
T8: TX write exit status 0
T8: --- /proc/tty/driver/serial after TX ---
T8: --- /proc/tty/driver/serial after TX ---
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: --- /proc/interrupts after TX ---
T8: --- /proc/interrupts after TX ---
T8:             CPU0  
T8:             CPU0  
T8:    4:       2335  MIPS        4  hub-rt
T8:    4:       2335  MIPS        4  hub-rt
T8:    9:        403  BRIDGE      1  qla1280
T8:    9:        403  BRIDGE      1  qla1280
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   12:          2  IOC3        6  ttyS0
T8:   12:          2  IOC3        6  ttyS0
T8:   22:        286  IOC3       22  ioc3-kbd
T8:   22:        286  IOC3       22  ioc3-kbd
T8:  ERR:          0
T8:  ERR:          0
T8: TYPE ON THE SERIAL CONSOLE NOW (30 s)
T8: TYPE ON THE SERIAL CONSOLE NOW (30 s)



T8: --- /proc/tty/driver/serial after RX window ---
T8: --- /proc/tty/driver/serial after RX window ---
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: cat: can't open '/proc/tty/driver/serial': No such file or directory
T8: --- /proc/interrupts after RX window ---
T8: --- /proc/interrupts after RX window ---
T8:             CPU0  
T8:             CPU0  
T8:    4:       2582  MIPS        4  hub-rt
T8:    4:       2582  MIPS        4  hub-rt
T8:    9:        403  BRIDGE      1  qla1280
T8:    9:        403  BRIDGE      1  qla1280
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   10:          0  BRIDGE      4  ioc3-eth
T8:   12:          8  IOC3        6  ttyS0
T8:   12:          8  IOC3        6  ttyS0
T8:   22:        286  IOC3       22  ioc3-kbd
T8:   22:        286  IOC3       22  ioc3-kbd
T8:  ERR:          0
T8:  ERR:          0
T8: starting shell
T8: starting shell
~ # uname -a
Linux (none) 7.3.0-rc3-00352-g3d56dd79da18 #1 SMP Fri Oct  2 11:29:41 CEST 2026 mips64 GNU/Linux
~ # lspci -v
00:01.0 Class 0200: 14e4:1645
00:02.1 Class 0100: 1000:0030
00:02.0 Class 0401: 1412:1724
00:05.0 Class 0c03: 1045:c861
00:01.0 Class 0100: 1077:1216
00:04.0 Class ff00: 10a9:0003
00:02.0 Class 0100: 1000:0030
~ # cat /dev/ls /edev
bsg           ptyq7         ptyy4         ttyb1         ttyse
console       ptyq8         ptyy5         ttyb2         ttysf
full          ptyq9         ptyy6         ttyb3         ttyt0
input         ptyqa         ptyy7         ttyb4         ttyt1
kmsg          ptyqb         ptyy8         ttyb5         ttyt2
loop-control  ptyqc         ptyy9         ttyb6         ttyt3
loop0         ptyqd         ptyya         ttyb7         ttyt4
loop1         ptyqe         ptyyb         ttyb8         ttyt5
loop2         ptyqf         ptyyc         ttyb9         ttyt6
loop3         ptyr0         ptyyd         ttyba         ttyt7
loop4         ptyr1         ptyye         ttybb         ttyt8
loop5         ptyr2         ptyyf         ttybc         ttyt9
loop6         ptyr3         ptyz0         ttybd         ttyta
loop7         ptyr4         ptyz1         ttybe         ttytb
mem           ptyr5         ptyz2         ttybf         ttytc
nst0          ptyr6         ptyz3         ttyc0         ttytd
nst0a         ptyr7         ptyz4         ttyc1         ttyte
nst0l         ptyr8         ptyz5         ttyc2         ttytf
nst0m         ptyr9         ptyz6         ttyc3         ttyu0
null          ptyra         ptyz7         ttyc4         ttyu1
port          ptyrb         ptyz8         ttyc5         ttyu2
ptmx          ptyrc         ptyz9         ttyc6         ttyu3
ptya0         ptyrd         ptyza         ttyc7         ttyu4
ptya1         ptyre         ptyzb         ttyc8         ttyu5
ptya2         ptyrf         ptyzc         ttyc9         ttyu6
ptya3         ptys0         ptyzd         ttyca         ttyu7
ptya4         ptys1         ptyze         ttycb         ttyu8
ptya5         ptys2         ptyzf         ttycc         ttyu9
ptya6         ptys3         random        ttycd         ttyua
ptya7         ptys4         rtc0          ttyce         ttyub
ptya8         ptys5         sda           ttycf         ttyuc
ptya9         ptys6         sda1          ttyd0         ttyud
ptyaa         ptys7         sda11         ttyd1         ttyue
ptyab         ptys8         sda2          ttyd2         ttyuf
ptyac         ptys9         sda9          ttyd3         ttyv0
ptyad         ptysa         st0           ttyd4         ttyv1
ptyae         ptysb         st0a          ttyd5         ttyv2
ptyaf         ptysc         st0l          ttyd6         ttyv3
ptyb0         ptysd         st0m          ttyd7         ttyv4
ptyb1         ptyse         tty           ttyd8         ttyv5
ptyb2         ptysf         tty0          ttyd9         ttyv6
ptyb3         ptyt0         tty1          ttyda         ttyv7
ptyb4         ptyt1         tty10         ttydb         ttyv8
ptyb5         ptyt2         tty11         ttydc         ttyv9
ptyb6         ptyt3         tty12         ttydd         ttyva
ptyb7         ptyt4         tty13         ttyde         ttyvb
ptyb8         ptyt5         tty14         ttydf         ttyvc
ptyb9         ptyt6         tty15         ttye0         ttyvd
ptyba         ptyt7         tty16         ttye1         ttyve
ptybb         ptyt8         tty17         ttye2         ttyvf
ptybc         ptyt9         tty18         ttye3         ttyw0
ptybd         ptyta         tty19         ttye4         ttyw1
ptybe         ptytb         tty2          ttye5         ttyw2
ptybf         ptytc         tty20         ttye6         ttyw3
ptyc0         ptytd         tty21         ttye7         ttyw4
ptyc1         ptyte         tty22         ttye8         ttyw5
ptyc2         ptytf         tty23         ttye9         ttyw6
ptyc3         ptyu0         tty24         ttyea         ttyw7
ptyc4         ptyu1         tty25         ttyeb         ttyw8
ptyc5         ptyu2         tty26         ttyec         ttyw9
ptyc6         ptyu3         tty27         ttyed         ttywa
ptyc7         ptyu4         tty28         ttyee         ttywb
ptyc8         ptyu5         tty29         ttyef         ttywc
ptyc9         ptyu6         tty3          ttyp0         ttywd
ptyca         ptyu7         tty30         ttyp1         ttywe
ptycb         ptyu8         tty31         ttyp2         ttywf
ptycc         ptyu9         tty32         ttyp3         ttyx0
ptycd         ptyua         tty33         ttyp4         ttyx1
ptyce         ptyub         tty34         ttyp5         ttyx2
ptycf         ptyuc         tty35         ttyp6         ttyx3
ptyd0         ptyud         tty36         ttyp7         ttyx4
ptyd1         ptyue         tty37         ttyp8         ttyx5
ptyd2         ptyuf         tty38         ttyp9         ttyx6
ptyd3         ptyv0         tty39         ttypa         ttyx7
ptyd4         ptyv1         tty4          ttypb         ttyx8
ptyd5         ptyv2         tty40         ttypc         ttyx9
ptyd6         ptyv3         tty41         ttypd         ttyxa
ptyd7         ptyv4         tty42         ttype         ttyxb
ptyd8         ptyv5         tty43         ttypf         ttyxc
ptyd9         ptyv6         tty44         ttyq0         ttyxd
ptyda         ptyv7         tty45         ttyq1         ttyxe
ptydb         ptyv8         tty46         ttyq2         ttyxf
ptydc         ptyv9         tty47         ttyq3         ttyy0
ptydd         ptyva         tty48         ttyq4         ttyy1
ptyde         ptyvb         tty49         ttyq5         ttyy2
ptydf         ptyvc         tty5          ttyq6         ttyy3
ptye0         ptyvd         tty50         ttyq7         ttyy4
ptye1         ptyve         tty51         ttyq8         ttyy5
ptye2         ptyvf         tty52         ttyq9         ttyy6
ptye3         ptyw0         tty53         ttyqa         ttyy7
ptye4         ptyw1         tty54         ttyqb         ttyy8
ptye5         ptyw2         tty55         ttyqc         ttyy9
ptye6         ptyw3         tty56         ttyqd         ttyya
ptye7         ptyw4         tty57         ttyqe         ttyyb
ptye8         ptyw5         tty58         ttyqf         ttyyc
ptye9         ptyw6         tty59         ttyr0         ttyyd
ptyea         ptyw7         tty6          ttyr1         ttyye
ptyeb         ptyw8         tty60         ttyr2         ttyyf
ptyec         ptyw9         tty61         ttyr3         ttyz0
ptyed         ptywa         tty62         ttyr4         ttyz1
ptyee         ptywb         tty63         ttyr5         ttyz2
ptyef         ptywc         tty7          ttyr6         ttyz3
ptyp0         ptywd         tty8          ttyr7         ttyz4
ptyp1         ptywe         tty9          ttyr8         ttyz5
ptyp2         ptywf         ttyS0         ttyr9         ttyz6
ptyp3         ptyx0         ttyS1         ttyra         ttyz7
ptyp4         ptyx1         ttyS2         ttyrb         ttyz8
ptyp5         ptyx2         ttyS3         ttyrc         ttyz9
ptyp6         ptyx3         ttya0         ttyrd         ttyza
ptyp7         ptyx4         ttya1         ttyre         ttyzb
ptyp8         ptyx5         ttya2         ttyrf         ttyzc
ptyp9         ptyx6         ttya3         ttys0         ttyzd
ptypa         ptyx7         ttya4         ttys1         ttyze
ptypb         ptyx8         ttya5         ttys2         ttyzf
ptypc         ptyx9         ttya6         ttys3         urandom
ptypd         ptyxa         ttya7         ttys4         vcs
ptype         ptyxb         ttya8         ttys5         vcs1
ptypf         ptyxc         ttya9         ttys6         vcsa
ptyq0         ptyxd         ttyaa         ttys7         vcsa1
ptyq1         ptyxe         ttyab         ttys8         vcsu
ptyq2         ptyxf         ttyac         ttys9         vcsu1
ptyq3         ptyy0         ttyad         ttysa         zero
ptyq4         ptyy1         ttyae         ttysb
ptyq5         ptyy2         ttyaf         ttysc
ptyq6         ptyy3         ttyb0         ttysd
~ # dd if=/dev/sda bs=512 count=1 of=sdadump
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.001238 seconds, 403.9KB/s
~ # hdexdumpcat sdadump | hexdump -C
00000000  0b e5 a9 41 00 00 00 01  2f 75 6e 69 78 00 00 00  |...A..../unix...|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 70 39 00 00  |............p9..|
00000020  00 40 00 00 00 00 00 ff  02 00 00 00 00 00 00 00  |.@..............|
00000030  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 00 00 00 1b f2 44 b0  73 67 69 6c 61 62 65 6c  |......D.sgilabel|
00000050  00 00 00 02 00 00 02 00  73 61 73 68 00 00 00 00  |........sash....|
00000060  00 00 00 03 00 04 14 00  00 00 00 00 00 00 00 00  |................|
00000070  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000130  00 00 00 00 00 00 00 00  1b ee 34 b0 00 04 10 00  |..........4.....|
00000140  00 00 00 0a 00 04 00 00  00 00 10 00 00 00 00 03  |................|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000190  00 00 00 00 00 00 00 00  00 00 10 00 00 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  1b f2 44 b0 00 00 00 00  00 00 00 06 00 00 00 00  |..D.............|
000001c0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  3e 21 a0 ee 00 00 00 00  |........>!......|
00000200
~ # random: crng init done
random: crng init done
 
Last edited:
  • Like
Reactions: Kaloz

About us

  • Silicon Graphics User Group (SGUG) is a community for users, developers, and admirers of Silicon Graphics (SGI) products. We aim to be a friendly hobbyist community for discussing all aspects of SGIs, including use, software development, the IRIX Operating System, and troubleshooting, as well as facilitating hardware exchange.

User Menu