Newbie here. Just picked up what looks like a near new Indigo 2 Xz and the indicator LED on the front panel won't light up. Followed the instructions in the user manual and firmly pressed down the "gold wall" (EISA backplane ) that holds the accessory cards.
2. Remove the top cover from the system and make sure the EISA backplane is firmly seated by pressing down on top of it. The backplane is the gold-colored metal wall that extends from the fan in the front of the system, along the back of the expansion board slots, to the back of the chassis. It’s okay to press quite firmly on the top of the backplane wall.
3. Check to make sure the internal power connectors are attached correctly to the system board. They are tight.
Both fans start up, floppy and hard drive LED's light up, dead monitor, what to do now?
Thanks in advance for any help you can provide.
2. Remove the top cover from the system and make sure the EISA backplane is firmly seated by pressing down on top of it. The backplane is the gold-colored metal wall that extends from the fan in the front of the system, along the back of the expansion board slots, to the back of the chassis. It’s okay to press quite firmly on the top of the backplane wall.
3. Check to make sure the internal power connectors are attached correctly to the system board. They are tight.
Both fans start up, floppy and hard drive LED's light up, dead monitor, what to do now?
Thanks in advance for any help you can provide.
Attachments
-
2.9 MB Views: 169
-
3 MB Views: 164