New first-time owner of a Fuel here, the machine used to start up and work properly but lately it shows these symptoms:
- it starts up randomly, usually it gets better if left plugged in for a few hours
- sometimes the boot sequence stops (light goes from blinking red to blinking white and then it shuts down)
Do you have any diagnostic procedure to follow?
I know that sometimes the PSU fails and I am aware of the ATX conversion kit offered by kubatyszko but before going down that road I would like to make sure that I do not have problems somewhere else, i.e. motherboard.
Right now the machine has stopped booting at all.
- it starts up randomly, usually it gets better if left plugged in for a few hours
- sometimes the boot sequence stops (light goes from blinking red to blinking white and then it shuts down)
Do you have any diagnostic procedure to follow?
I know that sometimes the PSU fails and I am aware of the ATX conversion kit offered by kubatyszko but before going down that road I would like to make sure that I do not have problems somewhere else, i.e. motherboard.
Right now the machine has stopped booting at all.