Battery 101: Indigo

massiverobot

irix detailer
Feb 8, 2019
121
108
43
Philly
twitter.com
Ah the SGI Iris Indigo... R4k or R3k - they both have issues with their battery back-ups not working. Some Indigos will error and just complain and boot IRIX, some will not boot until that battery is fixed. My R4k didn't boot until I replaced the battery.

So if you need to boot your Iris Indigo and it's not booting because of the battery, you can replace it with a little time, energy and a new battery.

  • You can order a new battery from Amazon - TL-5186
  • You will have to de-solder and re-solder the battery
  • You will get to know your Indigo Motherboard when it's all over
So order your new battery, wait for it to get in and shut down your Indigo.

  1. Remove the CPU/Motherboard
  2. Locate the battery
  3. Clip off the plastic retaining strap
  4. De-Solder the battery and remove it from MB, note orientation of pins
  5. Insert new battery and solder it up
  6. Re-install CPU board and power up and enjoy your Indigo
Some Images:
48
The old and new battery

49
Indigo 4K Motherboard/CPU board


50
Close up of battery- just clip off that annoying plastic strap and discard it.
 
Last edited:
  • Like
Reactions: Elf

About us

  • Silicon Graphics User Group (SGUG) is a community for users, developers, and admirers of Silicon Graphics (SGI) products. We aim to be a friendly hobbyist community for discussing all aspects of SGIs, including use, software development, the IRIX Operating System, and troubleshooting, as well as facilitating hardware exchange.

User Menu