I have changed all capacitor on 8001 LV (except the six 6800uf of two rails) the 8002 HV already have new capacitors.... all ok! The voltages is incredibly perfect: 12v is 12v, 3,5v is 3,5v ecc... but it continue to work only with a resistor on 3,5v graphic rail! If I remove it, the psu shutdown. I don’t think is normal, but I can’t explain why.
P.S. I can powerup the psu for only few seconds, the resistor on graphic rail is to small and burn! :-D
P.S. I can powerup the psu for only few seconds, the resistor on graphic rail is to small and burn! :-D
Attachments
-
1.9 MB Views: 171